Davey Rural water

Since Davey started business in 1934, we have developed a strong association with the rural customer. Davey have been manufacturing and supplying reliable pumps and pressure systems for the man on the land ever since.
From the outset we at Davey knew our products needed to be tough enough to withstand harsh Australian conditions in all their extremes. It's little wonder then that Davey customers around the world have come to depend on Davey for reliable rural water supply systems.
  

Deep Well & Commercial Jet Pumps
Rugged reliable single stage centrifugal pumps with deep well injectors, driven by Davey's TEFC motor. Pumps fitted with pressure switch for easy conversion to automatic operation. Automatic demand response valve fitted as standard to protect against loss of prime from over pumping
Davey manufactured high IP - TEFC motor is corrosion resistant and protects against vermin, dust and water. Motor and pump are designed for frequent starts providing a long and reliable working life. Every pump is performance and pressure tested in our factory to ensure quality and reliability. Marine grade aluminium pump body with Rilsan lining is a proven robust pump design for long life. Interchangable - colour coded jets and venturi kits to easliy match pump performance to required duty Pressure switch and pressure gauge fitted to enable easy conversion to automatic operation A.D.R. valve guarantees maintenance of minimum pump pressure and protection against loss of prime from over pumping
Engine-Powered Self Priming Pumps
Rugged, high performance twin impeller self priming pumps. These units are driven by a 13H.P. Briggs & Stratton 'Vanguard' engine or Honda 13hp GX390E engine, both fitted with an electric starter, and recoil rope start backup.
Twin impeller performance provides extra pressure when required. Pump casing, diffusers and impellers manufactured from quality corrosion resistant marine grade aluminum. 3 way discharge port for easy installation with a choice of plumbing sizes. Epoxy coated pump exterior for added corrosion resistance. Replaceable wear rings ensure continued high efficiency pumping. Self priming ability from 6m for fast easy use. Low oil protection on all models - engines won't start/run if oil level is inadequate, protecting your engine. All engines feature cast iron cylinder bore for long life. Oversize engine with power reserves for long life.
General-Purpose Electric Pumps
Robust & compact, multi-stage stainless steel centrifugal pumps, driven by a TEFC motor. Designed for total head duties to 33m and flows to 80lpm
Multistage pump, closed vane impellers with full length “D” drives, provide: • Superior reliability when pumping corrosive water • Easy assembly and servicing Corrosion resistant 304 stainless steel pump shaft and casing for long service life. High quality mechanical shaft seal for long life and reliability. Patented floating impeller neck rings provide: • High efficiency • Quieter pump operation The Davey manufactured TEFC motor has an IP55 enclosure providing: • Excellent corrosion resistance • High levels of resistance to dust and rain • Ability to operate reliably in high ambient temperatures Permanently split capacitor motor design for: • Reliable starting even in low voltage circumstances • Superior frequent starting performance Motor protected against both high operating temperatures and high current by a built in, automatically resetting thermal overload. All models come with a 2 metre power lead fitted with 3 pin Australian plug. Double contact C3-HTG sealed motor bearings for quieter running and longer life
Stainless Steel Multistage Transfer Pumps
Compact, all stainles steel horizontal multistage centrifugal pump & motor unit.
All hydraulic parts are in stainless steel with axial suction and vertical discharge, all in a compact design, with high efficiency, reduced power consumption, corrosion and wear resistant, with a long motor and pump life. Stainless steel impellers, feature high efficient impeller profiles with thick self centreing impeller neck rings. The impellers are mounted directly on an extended shaft, to give maximum performance per stage, reduced power consumption whilst increasing the wear resistance and operating life. The hydraulic assembly is attached to the motor bracket at 8 seperate points for better sealing and longer service life. The outer casing is of complete stainless steel construction. The totally enclosed fan cooled (TEFC) electric motor contains sealed and greased bearings for the motor life. The drive bearing is oversized for longer life, simple installation, easy service, economical and quiet running. The single phase models have a built in thermal overlaod protection with an automatic reset. The M series is capable of automatic control options such as the; Davey Hydrascan or a standard pressure switch and guage. They are also capable of being installed in multiple pump systems giving versatile system design, simple automatic controls and are suited for many different applications.
Packaged Pump Systems
Compact, all stainless steel, horizontal multistage centrifugal pump, as pressure systems. The control options are to suit the application with flows to 415lpm and heads to 65m.
Pump Horizontal multistage end suction, non-self priming centrifugal pump, of all stainless steel construction. Motor The compact TEFC motors in single phase, come with built in overloads. This is available on selected 3 phase models. Control Options:- Hydrascan Constant flow without cycling. High water temperature cut out. LED indicator light. Adjustable cut in pressure. Selectable pressure tank sizes. Benefits Manufactured from the highest quality corrosion resistant materials. All stainless steel pump design for high efficiency & quiet operation. TEFC motor for added vermin protection, dust & moisture resistance. Low maintenance design and selected control options to suit application.
Engine-Powered Self Priming Pumps
Rugged, economical open impeller self priming pumps. These units are driven by Honda GX200 6.5hp overhead valve petrol engines
Pump casing, suction and discharge port are manufactured from quality corrosion resistant marine grade aluminum. Heavy duty cast iron open impeller and diffuser are able to handle some solids without blockage. Self priming ability from 6m for fast easy use. Low oil protection on all models - engines won't start/run if oil level is inadequate, protecting your engine. All engines feature cast iron sleeved cylinder bore for long life.
Submersible Borehole Pumps
6" stainless steel submersible borehole pump manufactured from corrosion and abrasion resistant stainless steel. Close coupled to Nema standard submersible electric motor. Designed for flow rates to 77m3/hr, 1,280lpm from standard 6" ID bore casing.
Advanced stainless steel manufacturing technology with state of the art stainless steel, complete 316SS hydraulic design provides high efficiency pump design, flexible stage construction and unique sand handling capabilities. High efficiency impeller design, radial flow impeller for 18 & 27m3/hr and axial flow impeller for 45 & 60m3/hr providing maximum efficiency, reduced power consumption and maximum performance from 6" ID bore. Fluted silicon carbide / polyurethane bearings and floating PTFE neck rings provides wear resistance for longer pump life and unique sand handling capabilities. Check valve assembly incorporated into discharge head and stainless steel upthrust washer for pump & motor protection and horizontal or vertical operation. Hexagonal shaft design, single outer casing and flexible stage design provides maximum pump strength & operating pressure, matched pump performance and easy to install & service.